Adjust sound recording settings for Windows 10 users
Modified on: Sun, 19 Jun, 2022 at 11:28 AM
We recommend our first-time users to adjust sound recording settings before using PitchVantage. Follow the instructions below and you only need to complete this process once.
Windows 7&8 users, please click here to continue; Windows 10 users, please follow the instructions below.
First, connect a headset with a mic to your laptop.
- If you use a USB headset, click here to continue.
- If you use a Bluetooth headset, click here to continue.
- If you use a headset with one or two jacks, follow the instructions below.
Next, right click the sound iconon desktop > Click Open Sound settings. Under Input, You should see your input device in the dropdown menu.
- If your recording/input device is Realtek High Definition Audio, go down to the next step.
- If your recording/input device is Conexant SmartAudio HD, click here to continue.
- If your recording/input device is IDT High Definition Audio CODEC or other audio drivers, click here to continue.
Next, click Device properties under Input.
- Uncheck Disable All Sound Effects (if visible)
- Check Immediate Mode (if visible)
- Check Noise Suppression (if visible)
- Check Mono Microphone (if visible)
- Check Microphone Focus (if visible)
Newer laptops have only one setting item: Enable. Check Enable.
- Drag Microphone slider to 100
- Drag Microphone Boost slider to 0.0 dB (if visible)
Important: make sure microphone is NOT muted.
Picture below shows the microphone is muted. Un-mute by clicking the icon .
Click Listen > Uncheck Listen to this device.
Click OK. Your adjustment is complete!
Lastly, click the attachment below to listen to a 6-second audio and get a sense of what good quality recording sounds like. You are all set and ready to launch PitchVantage!
Did you find it helpful?
Sorry we couldn't be helpful. Help us improve this article with your feedback.